Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Brake Caliper: Service and Repair
Rear
Removal and Installation
Rear Disc Brake Components
REMOVAL
Remove Union Bolt And Gasket And Disconnect Flexible Hose
1. Disconnect flexible hose.
(a) Remove the union bolt and gasket from the Caliper, then disconnect the flexible hose from the Caliper.
-
Torque: 30 Nm (22 ft. lbs.)
NOTE: Insert the flexible hose lock securely in the lock hole in the Caliper.
(b) Use a container to catch the brake fluid as it drains out.
2. Remove Caliper.
Remove the installation bolt and the Caliper from the torque plate.
-
Torque: 20 Nm (14 ft. lbs.)
3. Remove these parts:
(a) 2 Brake Pad with anti-squeal shims.
(b) 2 pad support plates.
4. Remove main pin.