Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
(d) Remove the 2 bolts and mounting insulator.
8. Remove RH engine mounting bracket.
Remove the 3 bolts and mounting bracket.
NOTE: Raise the engine as far as it will go, and remove the mounting bracket.
9. Remove spark plugs.
(a)
Disconnect the 4 high-tension cords from the clamp on the cylinder head cover.
(b) Disconnect the 4 high-tension cords from the spark plug.
(c)
Remove the 4 spark plugs.
10. Remove No. 2 timing belt cover.
(a)
Remove the 2 bolts, and disconnect the engine wire protector from the generator bracket and adjusting bar.
(b) Remove the 4 bolts and timing belt cover.
11. Set No. 1 cylinder to Top Dead Center (TDC)/compression.