toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3255 > < Component Tests and General Diagnostics|Page 3253
Page 6
background image

(m)Position the injector connector upward.

(n) Tighten the 2 bolts holding the delivery pipe to the cylinder head.

Torque: 13 N.m (130 kgf.cm, 9 ft.lbf) 

(o) Install the engine wire protector to the 2 brackets on the front side of the intake manifold.

(p) Install the engine wire protector to LH side of the intake manifold with the bolt.

(q) Connect the 4 injector connectors.

Component Tests and General Diagnostics|Page 3255 > < Component Tests and General Diagnostics|Page 3253