Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Distributor: Service and Repair
Removal and Installation
COMPONENTS FOR REMOVAL AND INSTALLATION
DISTRIBUTOR REMOVAL
1. REMOVE AIR CLEANER CAP
2. DISCONNECT DISTRIBUTOR CONNECTOR
3. DISCONNECT HIGH-TENSION CORDS FROM SPARK PLUGS AND IGNITION COIL
(a) Disconnect the 4 high-tension cords from the clamp on the cylinder head cover.
(b) Disconnect the high-tension cords at the rubber boot. Do not pull on the high-tension cords.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
4. REMOVE DISTRIBUTOR WITH HIGH-TENSION CORDS