toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 5436 > < Steering Gear|Removal and Installation|Page 5434
Page 7
background image

b. Using the 09950 - 60010 (09951 - 00250, 09951 - 00400. 09952 - 06010), 09950-70010 (09951 -07360) SST, press in the oil seal.

NOTE: Make sure you install the oil seal facing the correct direction. Take care that the oil seal does not get reversed as you install it.

3. Install the steering rack by doing the following.

a. Install the 09631 - 20051  SST to the rack and, if necessary, scrape the burrs off the rack teeth end and burnish.
b. Coat the SST with power steering fluid.
c. Install the rack into the rack housing.
d. Remove the SST.

4. Install the oil seal, doing the following.

a. To prevent any oil seal lip damage, install the 09631 - 20051 SST to the steering rack, and apply power steering fluid. 

NOTE: Install the SST to the steering rack side without teeth.

Steering Gear|Removal and Installation|Page 5436 > < Steering Gear|Removal and Installation|Page 5434