Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
c. Coat the lip of oil seal with MP grease.
8. Transmission Case Side: If necessary, replace side bearing outer race.
a. Using a brass bar and hammer, drive out the bearing outer race.
b. Install the bearing retainer without an O-ring.
c. Install and torque the 6 bolts.
Torque: 18 N.m (13 ft. lbs.).
d. Place the thinnest shim into the case.
e. Using SST and a press, install a new bearing outer race.
SST 09950-60020 (09951-00680), 09950-70010 (09951 -07150)
f.
Remove the 6 bolts.
g. Remove the bearing retainer and shim.
9. Transaxle Case Side: If necessary, replace side bearing outer race.
a. Using a brass bar and hammer, drive out the bearing outer race and shim.
b. Place the shim into the case.
c. Using SST and a press, install a new bearing outer race.
SST 09950-60020 (09951-00680), 09950-70010 (09951 -07150)