toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Exterior Moulding / Trim > < Front Door Window Glass|System Diagnosis|Page 5506
Page 3
background image

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Adjust the glass in position (forward/rearward) and attitude.

1. Loosen the 3 bolts of the carrier plate and adjust the glass.
2. Tighten the loosened bolts again.

Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)

d. Adjust the glass in position (vertical) and attitude (when glass fully closed).

Adjust the door window upper stops.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

Exterior Moulding / Trim > < Front Door Window Glass|System Diagnosis|Page 5506