Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Fuel Pressure Release: Service and Repair
A. When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe these procedures:
1. Disconnect the fuel pump connector.
2. Start the engine. After the engine has stopped on its own, turn the ignition switch OFF.
3. Put a container under the connection.
4. Slowly loosen the connection.
5. Disconnect the connection.
6. Plug the connection with a rubber plug.
7. Reconnect the fuel pump connector.
B. When connecting the union bolt on the high pressure pipe union, observe these procedures;
1. Always use 2 new gaskets.
2. Tighten the union bolt by hand.
3. Tighten the union bolt to the specified torque.
Torque: 29 Nm (330 kgf.cm, 21 ft.lbf)
C. When connecting the flare nut on the high pressure pipe union, observe these procedures:
1. Apply a light coat of engine oil to the flare nut, and tighten the flare nut by hand.