toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Heater Core Case|Removal and Installation|Page 5028 > < Heater Core Case|Removal and Installation
Page 2
background image

3. REMOVE WATER HOSES FROM HEATER RADIATOR PIPES

a. Remove the bolt and the water valve.
b. Grip the claws of the hose clip with pliers and slide the clip along the hose to a place where it does not clamp the hose to the pipe
c. Disconnect the water hoses.

4. REMOVE PIPE GROMMETS
5. REMOVE INSTRUMENT PANEL AND REINFORCEMENT

6. REMOVE HEATER UNIT

a. Disconnect the connector.
b. Remove the wire harness.
c. Remove the 4 nuts and heater unit.

INSTALLATION

Installation is in the reverse order of removal.

Heater Core Case|Removal and Installation|Page 5028 > < Heater Core Case|Removal and Installation