Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-256002.png)
Measuring Point Reference
4. INSPECT TOE-IN
If the toe-in is not within the specification, adjust it at the rack ends.
5. ADJUST CAMBER
NOTICE: After the camber has been adjusted, inspect the toe-in.
a. Remove the front wheels.
b. Remove the 2 nuts on the lower side of the shock absorber.
c. Coat the threads of the nuts with engine oil.
d. Temporarily install the 2 nuts.
e. Adjust the camber by pushing or pulling the lower side of the shock absorber in the direction in which the camber adjustment is required.
f.
Tighten the 2 nuts.
