Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
c. Type A:
Remove the 4 bolts.
d. Type B:
Remove the 2 bolts and 2 nuts.
e. Disconnect the throttle body from the intake manifold.
f.
Remove the gasket.
g. Disconnect these hoses from the throttle body, and remove the throttle body:
1. Water bypass hose (from water outlet)
2. Water bypass hose (from water bypass pipe)
* California:
Air hose (from intake manifold) for air assist system
* Except California:
Air hose (from air tube) for PS idle-up
INSTALLATION
1. INSTALL THROTTLE BODY
a. Connect these hoses to the throttle body:
1. Water bypass hose (from water outlet)
2. Water bypass hose (from water bypass pipe)
3. California:
Air hose (from intake manifold) for air assist system
4. Except California:
Air hose (from air tube) for PS idle-up