Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Knock Sensor: Testing and Inspection
1. REMOVE KNOCK SENSOR 1
a. Disconnect the knock sensor connector.
b. Using SST, remove the knock sensor.
SST 09816-30010
2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR 1
a. Using SST, install the knock sensor.
SST 09816-30010
Torque: 44 Nm (450 kgf.cm, 33 ft.lbf)
b. Connect the knock sensor connector.