Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1247008.png)
A/T: 2.9 Nm (30 kgf.cm, 25 in.lbf)
6. INSTALL VOLTAGE REGULATOR AND BRUSH HOLDER
a. M/T:
Install the brush holder cover to the brush holder.
NOTE: Be careful of the holder installation direction.
b. M/T:
Place the voltage regulator together with the brush holder horizontally on the rectifier end frame.
c. M/T:
Install the 5 screws until there is a clearance of approx. 1 mm (0.04 in.) between the brush holder and voltage regulator.
Torque: 2.0 Nm (20 kgf.cm, 17 in.lbf)
d. M/T:
Fit the brush holder cover.