Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1004001.png)
Seals and Gaskets: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE LH AND RH DRIVE SHAFTS
2. REMOVE BOTH SIDE GEAR SHAFT OIL SEALS
Using SST, drive out the oil seals on both sides.
SST 09308-00010
3. INSTALL BOTH SIDE GEAR SHAFT OIL SEALS
a. Using SST and a hammer, drive in new oil seals on both sides.
SST 09350-32014 (09351-32150), 09950-70010 (09950-07100)
Oil seal depth:
LH: 2.7 ± 0.5 mm (0.106 ± 0.020 inch)
RH: 0 ± 0.5 mm (0 ± 0.020 inch)
b. Coat the lip of the oil seal with MP grease.
4. INSTALL LH AND RH DRIVE SHAFTS
5. CHECK ATF AND CHECK FLUID LEVEL