Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
d. Remove the 2 clamp bolts holding the sensor wire harness from the body and shock absorber.
Torque: 5.0 Nm (44 inch lbs.)
2. Remove the speed sensor from the axle carrier.
Torque: 8.0 Nm (71 inch lbs.)
NOTE: At the time of installation, please refer to the following items.
-
There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed.
-
The sensor is installed flat against the knuckle when you tighten the bolt.
INSTALLATION
Instal in the reverse order of removal. After installation, check speed sensor signal.