toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 1273
Page 2
background image

Minimum pressure: 981 kPa (142 psi)
Difference between each cylinder: 98 kPa (14 psi) or less 

e. If the cylinder compression in one or more cylinders is low, pour a small amount of engine oil into the cylinder through the spark plug hole and

repeat steps (a) through (c) for cylinders with low compression.
-

If adding oil helps the compression, it is likely that the piston rings and/or cylinder bore are worn or damaged.

-

If pressure stays low, a valve may be sticking or seating is improper, or there may be leakage past the gasket.

14. Reinstall spark plugs.
15. Reconnect high-tension cords to spark plugs.
16. Reconnect distributor connector.

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 1273