toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

With ABS|Page 4991 > < Brake Master Cylinder|Specifications|Page 4988
Page 1
background image

Brake Master Cylinder: Service and Repair
With ABS

Components

 

REMOVAL

1. Remove suspension upper brace.

Remove Bolts, Nuts And Upper Brace

(a) Remove the 2 bolts, 4 nuts and upper brace.
(b) Temporarily fasten the Shock Absorber with the 4 nuts.

2. Remove Air Cleaner assembly.
3. Disconnect Level Warning Switch connector.
4. Take out fluid with syringe.

CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.

With ABS|Page 4991 > < Brake Master Cylinder|Specifications|Page 4988