toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3254 > < Component Tests and General Diagnostics|Page 3252
Page 5
background image

(g) Install these parts to the cylinder head:

(1) 2 spacers
(2) Except California;

4 new insulators

(h) While turning the injector left and right, install it to the delivery pipe. Install the 4 injectors.
(i) Position the injector connector upward.
(j) Attach the 4 injectors and delivery pipe assembly to the cylinder head.

(k) Temporarily install the 2 bolts holding the delivery pipe to the cylinder head.
(l) Check that the injectors rotate smoothly. 

HINT: If injectors do not rotate smoothly, the probable cause is incorrect installation of O-rings. Replace the O-rings.

Component Tests and General Diagnostics|Page 3254 > < Component Tests and General Diagnostics|Page 3252