Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
![background image](/toyota/celica_gt_ltd_ed_convertible/l4-2164cc_2.2l_dohc_mfi/Page-1068001.png)
Knock Sensor: Component Tests and General Diagnostics
COMPONENTS FOR REMOVAL AND INSTALLATION
KNOCK SENSOR 1 INSPECTION
1. REMOVE KNOCK SENSOR 1
(a) Disconnect the knock sensor connector.
(b) Using SST. remove the knock sensor. SST 09816-30010
2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity. replace the sensor.
3. REINSTALL KNOCK SENSOR 1
(a) Using SST, install the knock sensor. SST 09816-30010
Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)
(b) Connect the knock sensor connector.