toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Rear Knuckle|Specifications|Page 5497 > < Rear Knuckle|Specifications
Page 1
background image

Rear Knuckle: Service and Repair

Rear

REMOVAL

1. Remove the rear wheel.

Installation Hint:  Torque to 103 Nm (76 ft. lbs.).

2. If the vehicle has rear disc brakes, remove the brake caliper and disc by doing the following.

a. Remove the two brake caliper set bolts. 

Installation Hint:  Torque to 47 Nm (34 ft. lbs.).

b. Support the brake caliper securely.
c. Remove the disc.

3. If the vehicle has rear drum brakes, remove the brake drum.
4. Check the bearing backlash and axle hub deviation by doing the following.

Rear Knuckle|Specifications|Page 5497 > < Rear Knuckle|Specifications