Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
/Page-768003.png)
d. Using a pin punch, push out the three straight pins.
e. Remove the two front differential pinion shafts and No.2 front differential pinion shaft.
f.
Remove the pinion shaft holder, four differential pinions, pinion thrust washers, front side gear and thrust washer from the differential No.2
case.
6. REMOVE DIFFERENTIAL INTERMEDIATE CASE
Using a torx wrench, remove the fifteen torx screws and differential intermediate case.
