Celica ST Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1998)
Blower Motor Resistor: Testing and Inspection
1. REMOVE LOWER FINISH PANEL
2. REMOVE BLOWER RESISTOR
a. Disconnect the connector.
b. Remove the 2 screws and the blower resistor.
3. INSPECT BLOWER RESISTOR CONTINUITY
If continuity is not as specified, replace the blower resistor.
4. INSTALL BLOWER RESISTOR
a. Install the blower resistor and 2 screws.
b. Connect the connector.
5. INSTALL LOWER FINISH PANEL