Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
Shift Interlock Solenoid: Testing and Inspection
1. Inspect shaft lock solenoid.
a. Disconnect the solenoid connector.
b. Using an ohmmeter, measure the resistance between terminals.
-
Standard resistance: 30-37 Ohms
If resistance value is not as specified, replace the solenoid.
c. Apply battery positive voltage between terminals. Check that the solenoid can be heard operating. If the solenoid does not operated, replace
the solenoid.