Celica Supra L6-3.0L DOHC (7M-GE) (1986)
/Page-450001.png)
Throttle Body: Testing and Inspection
Late 1986-1988 7M-GE & 7M-GTE Engines
1.
Operate throttle linkage through full range, ensuring that throttle does not bind or stick.
2.
Start engine and allow to idle, then using finger, check for vacuum at ports R and P of throttle body.
3.
Increase engine speed and again check for vacuum at ports R and P of throttle body.
4.
No vacuum should be present at ports during idle and vacuum should be present at port P at any speed except idling. No vacuum should be present
at port R at any speed except idle.
5.
If throttle body does not perform as outlined, remove throttle body and repair or replace as necessary.