toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal/Installation|Page 2376 > < Windows - Wire Type Regulator Assembly Installation|Page 2369
Page 1
background image

Wiper Switch: Service and Repair
Removal/Installation

1.

Disconnect battery ground cable.

2.

Remove horn button screws and horn button.

3.

Scribe alignment marks on steering wheel and steering shaft.

4.

Remove steering wheel nut.

5.

Using a steering wheel puller, remove steering wheel.

6.

Remove steering column upper and lower covers.

7.

Remove combination switch.

8.

Reverse procedure to install.

Removal/Installation|Page 2376 > < Windows - Wire Type Regulator Assembly Installation|Page 2369