toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Specifications|Page 5220 > < Headliner|Specifications|Page 5218
Page 3
background image

a. Using a screwdriver, remove the rear seat side cover RH.

HINT:  Tape the screwdriver tip before use.

b. Employ the same manner described above to the other side.

19. REMOVE REAR SEAT SIDE GARNISH LH (FIXED TYPE REAR SEAT)
20. REMOVE ROOM PARTITION BOARD LH (SEPARATED TYPE REAR SEAT)

a. Remove the 2 clips and 2 built-in clips room partition board LH.

21. REMOVE ROOM PARTITION BOARD RH (SEPARATED TYPE REAR SEAT)

a. Remove the clip and 2 built-in clips room partition board RH.

22. REMOVE ROOF SIDE GARNISH INNER RH

a. Using a screwdriver, remove the roof side garnish inner RH.

HINT:  Tape the screwdriver tip before use.

b. Employ the same manner described above to the other side.

23. REMOVE ROOF SIDE GARNISH INNER LH
24. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

Headliner|Specifications|Page 5220 > < Headliner|Specifications|Page 5218