Corolla L4-1.8L (1ZZ-FE) (2004)
c. Install the bolt to the brake pedal support sub-assy.
Torque: 23.6 Nm (240 kgf-cm, 17 ft. lbs.)
11. CONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS
a. Apply the lithium soap base glycol grease to the push rod clevis pin.
b. Connect the brake master cylinder push rod clevis with the push rod clevis pin, wave washer and clip.
12. INSTALL COMBINATION METER ASSEMBLY
13. CHECK AND ADJUST BRAKE PEDAL HEIGHT
14. CHECK PEDAL FREE PLAY
15. CHECK PEDAL RESERVE DISTANCE