Corolla L4-1.8L (1ZZ-FE) (2004)
Parts Information
Repair Procedure
1.
Remove inner and outer front brake pads following the procedures outlined in the Technical Information System (TIS), 2003 - 2005 model year
Corolla Repair Manual:
Front Brake: Overhaul.
2.
Replace or resurface front disc rotors with the On-Car Brake Lathe according to the applicable repair manual to within serviceable limits.
Minimum Thickness: 23 mm (0.91 in.)
3.
Add anti-squeal grease to the back of each of the inner and outer replacement brake pads as shown.
4.
Install anti-squeal shim No.1 to the replacement pads and apply anti-squeal grease in the same pattern as step 3.
NOTE:
^
It is necessary to apply anti-squeal grease to both inner and outer brake pads.
^
Do not wipe off anti-squeal grease if it overflows from the slits in the anti-squeal shim.