Corolla L4-1.8L (1ZZ-FE) (2004)
Exhaust Pipe: Technical Service Bulletins
Exhaust System - Tailpipe Joint Clamp Installation
PRODUCT GENERAL INFORMATION
PG003-05
March 14, 2005
Title:
EXHAUST TAILPIPE JOINT CLAMP INSTALLATION
Models:
Applicable Models
Introduction
The purpose of this bulletin is to provide additional details regarding the proper installation angle of an exhaust tailpipe joint clamp on applicable Toyota
vehicles.
Applicable Vehicles
^
2003 - 2005 model year Corolla vehicles.
^
2000 - 2005 model year ECHO vehicles.
^
2004 - 2005 model year Land Cruiser vehicles.
^
2003 - 2005 model year Matrix vehicles.
^
2001 - 2003 model year Prius vehicles.
^
2004 - 2005 model year Sequoia vehicles.
^
2004 - 2005 model year Scion xA vehicles.
^
2004 - 2005 model year Scion xB vehicles.
^
2003 - 2005 model year Tundra vehicles.
Warranty Information
Installation Procedure
All Models:
Install exhaust tailpipe assembly.
1.
Install a new gasket into the exhaust center pipe.
2.
Install the new clamp positioning the bolt within the acceptable range" shown in the corresponding illustrations.
NOTE:
Do not reuse the removed gasket and clamp.
2003 - 2005 Corolla: