Corolla L4-1.8L (1ZZ-FE) (2004)
/Page-951001.png)
Control Assembly: Service and Repair
HEATER CONTROL & ACCESSORY ASSY
REPLACEMENT
1. REMOVE CONSOLE PANEL UPPER
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL
3. REMOVE HEATER CONTROL & ACCESSORY ASSY
a. Release the 2 fitting claws and pull out the heater control & accessory assy.
b. Using a screwdriver, open the claw of the cable clamp and disconnect the defroster damper control cable.
NOTE:
-
Be careful not to bend the cable wire.
-
If the cable wire bends, the heater control & accessory assy operationality becomes worse.
HINT: Tape the screwdriver tip before use.
c. Using a screwdriver, open the claw of the cable clamp and disconnect the air mix damper control cable.
NOTE:
-
Be careful not to bend the cable wire.
-
If the cable wire bends, the heater control & accessory assy operationality becomes worse.
HINT: Tape the screwdriver tip before use
d. Disconnect the connector, remove the heater control & accessory assy.