Corolla L4-1.8L (1ZZ-FE) (2004)
11. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSY RH
a. Remove the PS oil pump reservoir and put it aside.
b. Place a wooden block between the jack and engine, and set the jack, then remove the 4 bolts, the 2 nuts and engine mounting insulator RH.
12. REMOVE V-RIBBED BELT TENSIONER ASSY
a. Remove the bolt, nut and V-ribbed belt tensioner.
HINT: Handle a jack up and down to remove the bolt.
13. ADJUST VALVE CLEARANCE
NOTICE: Be sure not to revolve the crankshaft without the chain tensioner.
a. Set the No. 1 cylinder to the TDC/compression.
b. Place match marks on the timing chain and camshaft timing sprockets.
c. Remove the 2 nuts and chain tensioner.