Corolla L4-1.8L (1ZZ-FE) (2004)
Alternator: Service and Repair
Disassembly and Reassembly
OVERHAUL
1. REMOVE GENERATOR PULLEY
SST 09820-63010 (09820-06010, 09820-06020)
a. Hold SST 1 - A with a torque wrench, and tighten SST 1 - B clockwise to the specified torque.
Torque: 39 Nm (398 kgf.cm, 29 ft.lbf)
NOTE: Check that SST is secured to the rotor shaft.
b. Mount SST 2 in a vise.
c. Insert SST 1 - A, B into SST 2, and attach the pulley nut to SST 2.
d. To loosen the pulley nut, turn SST 1 - A in the direction shown in the illustration.
NOTE: To prevent damage to the rotor shaft, do not loosen the pulley nut more than one-half of a turn.
e. Remove the alternator form SST 2.