Corolla L4-1.8L (1ZZ-FE) (2004)
/Page-800009.png)
21. INSTALL REPAIR SERVICE STARTER KIT
(a) Apply grease to the plunger and hook.
(b) Hang the plunger hook of the repair service starter kit to the starter drive lever set pin.
(c) Install the plunger and return spring.
(d) Install the repair service starter kit with the 2 screws.
Torque: 7.5 Nm (76 kgf-cm, 66 in.-lbf)
(e) Connect the lead wire to terminal C with the nut.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)