Corolla L4-1.8L (1ZZ-FE) (2004)
/Page-621010.png)
NOTICE: Make sure not to catch wire harness.
b. Install the 2 terminals into the indicator lamp wire connector.
c. Install the wire harness and connector as shown in the illustration.
34. INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B, C and D.
b. Connect the 2 wire harness clamps to the shift lever plate.
c. Connect the 2 connector.