Corolla L4-1.8L (1ZZ-FE) (2004)
NOTE:
Do NOT use red shop towels. These towels contain silicone.
4.
Install the door glass window run.
A.
Insert the glass run into the front side of the window run channel. Then position the glass run in the No. 6 corner.
B.
Fit the rear of the glass run into the division bar window channel. Then position the glass run in the No. 7 corner.
C.
Press the center section of the window run into the door frame.
5.
Using a plastic pry tool, press the glass run into the upper portion of the door frame to securely adhere the double-sided tape.
6.
Fully close the window.