Corolla L4-1.8L (1ZZ-FE) (2004)
3. Turn the wiper switch to the INT position.
4. Connect the battery (+) to terminal 6 (+S) of the connector for 5 seconds.
5. Connect the battery (-) to terminal 6 (+S) of the connector. Operate the intermittent wiper relay and check voltage between terminal 7 (+1) and
terminal 5(EW).
d. Operation Check (Washer switch)
1. Turn the wiper switch to the OFF position.
2. Connect the battery (+) to terminal 8 (+B) of the connector, the battery (-) to terminal 6 (+S) and 5 (EW) of the connecter.
3. Connect the voltmeter (+) terminal to terminal 7 (+1) of the connector, the voltmeter (-) terminal to terminal 5 (EW) of the connector. Turn the
washer switch to ON and OFF and check voltage between terminal 7 (+1) and terminal 5 (EW).
Standard: See the illustration.