Corolla L4-1.8L (2ZR-FE) (2009)
A. PARTS
B TOOLS, EQUIPMENT & MATERIALS
^
Standard hand tools
^
E6 TORX(R) socket
^
Techstream scantool
^
Protective tape
IV. Background & Components
If the vehicle is operated in extremely low temperatures there is a possibility that condensed moisture from a positive crankcase ventilation (PCV) port
may seep into the brake system vacuum port ("port") and freeze. The port is located inside the intake manifold and provides vacuum assist for the brakes.
Should this condition continue, ice may slowly accumulate at the port and in the worst case, ultimately plug the port. As a result, power assist to the
brakes would gradually decrease (eventually to zero), and the increased pedal pressure required could lead to greater vehicle stopping distances. To
correct this condition, an Intake Air connector Kit (shown) will be installed.
V. Table of Contents
VI. Corolla & Corolla Matrix Work Procedure
VII. Scion xD Work Procedure
VIII.Appendix