Corolla L4-1.8L (2ZR-FE) (2009)
(b) Remove the cotter pin and nut.
(c) Install SST to the front lower ball joint as shown in the illustration.
SST: 09960-20010
09961-02050
09961-02050
NOTE: Check that the clearance measurement between SST and the front axle assembly is 1 mm (0.04 in.).
(d) Using SST, remove the front lower ball joint from the front axle assembly as shown in the illustration.
SST: 09960-20010
09961-02010
09961-02050
09961-02050
CAUTION: Apply grease to the threads and end of the SST bolt.
NOTICE:
-
Install SST so that A and B are parallel.
-
Be sure to place a wrench on the part indicated in the illustration.
-
Do not damage the front lower ball joint dust cover.