Corolla L4-1.8L (2ZZ-GE) (2005)
Yaw Rate Sensor: Service and Repair
YAW RATE SENSOR ASSEMBLY
REPLACEMENT
NOTICE: Do not use the dropped or damaged yaw rate sensor. Keep foreign matter from adhering to the area between the yaw rate sensor bracket
and body.
1. REMOVE FRONT SEAT ASSEMBLY LH
2. REMOVE YAW RATE SENSOR BRACKET
a. Remove the bolt and yaw rate sensor bracket.
3. REMOVE YAW RATE SENSOR ASSEMBLY
a. Disconnect the connector from the yaw rate sensor assembly.
b. Remove the 2 bolts and yaw rate sensor assembly.
NOTICE: Do not remove the installation nuts.
4. INSTALL YAW RATE SENSOR ASSEMBLY
a. Install the yaw rate sensor assembly with the 2 bolts.
Torque: 21 Nm (214 ft. lbs., 15 ft. lbs.)
b. Connect the connector to the yaw rate sensor assembly.