Corolla L4-1.8L (2ZZ-GE) (2005)
17. INSTALL PARKING BRAKE SHOE STRUT LH
a. Apply the high temperature grease to the contact part of the shoe strut and tension spring.
b. Install the parking brake shoe strut LH.
c. Using needle-nose pliers, install the 2 upper side tension springs.
HINT: Install the tension spring securely to the groove of the shoe strut.
18. CHECK PARKING BRAKE INSTALLATION
a. Check that each part is installed properly.
NOTICE: There should be no oil or grease on the friction surface of the shoe lining and disc.
19. INSTALL REAR DISC
a. Install the rear disc by aligning the matchmarks.
20. ADJUST PARKING BRAKE SHOE CLEARANCE