Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-988001.png)
Condenser HVAC: Testing and Inspection
W/ RECEIVER CONDENSER ASSEMBLY
ON-VEHICLE INSPECTION
1. INSPECT W/ RECEIVER CONDENSER ASSEMBLY
a. If a fin of the w/receiver condenser assembly is dirty, clean it with water and dry it with compressor air.
NOTE: Do not damage the fin of the w/receiver condenser assembly.
b. If a fin of the w/receiver condenser assembly is bent, make it straight using a screwdriver or pliers.
2. INSPECT W/ RECEIVER CONDENSER ASSEMBLY FOR LEAKAGE OF REFRIGERANT
a. Using a halogen leak detector, check pipe joints for gas leakage.
b. If gas leakage is detected in a joint, check the torque of the joint.
