Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-991002.png)
4. INSTALL HEATER CONTROL & ACCESSORY ASSEMBLY
a. Install the inner cable end of the air mix damper control cable to the heater control lever.
b. Install the outer cable of the air mix damper control cable to the cable clamp.
NOTE:
-
Be careful not to bend the cable wire.
-
If the cable wire bends, the heater control & accessory assembly operationality becomes worse.
HINT:
-
Operating the heater control knob and check that it properly stops at both ends of MAX. COOL and MAX. HOT and no recoil is
identified.
-
Check that the outer cable should not be disengaged (moved) from the heater control & accessory assembly when the cable is pulled.
c. Install the inner cable end of the defroster damper control cable to the heater control lever.
d. Install the outer cable of the defroster damper control cable to the cable clamp.
NOTE:
-
Be careful not to bend the cable wire.
-
If the cable wire bends, the heater control & accessory assembly operationality becomes worse.
HINT:
-
Operating the heater control knob and check that it properly stops at both ends of FACE and DEF and no recoil is identified.
-
Check that the outer cable should not be disengaged (moved) from the heater control & accessory assembly when the cable is pulled.
e. Connect the connector, install the heater control & accessory assembly.
