Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-522003.png)
a. Remove the 2 screws, then remove the ECM bracket No. 2.
8. REMOVE ECM BRACKET NO.3 (DENSO MADE)
a. Remove the 2 screws, then remove the ECM bracket No. 3.
9. INSTALL ECM BRACKET NO.3 (DENSO MADE)
a. Install the ECM bracket No. 3 with the 2 screws.
Torque: 3.2 Nm (33 kgf.cm, 28 in.lbf)
10. INSTALL ECM BRACKET NO.2 (DENSO MADE)
a. Install the ECM bracket No. 2 with the 2 screws.
