Corolla L4-1.8L (2ZZ-GE) (2005)
g. Using a screwdriver, unfasten the claw. Then remove the clamp from the air pump.
3. INSTALL AIR PUMP ASSY
a. Fit the clamp into the air pump.
b. Install the air pump with the 2 bolts and nut.
Torque: 7.0 Nm (71 kgf.cm, 62 in.lbf) for air pump x body
8.4 Nm (86 kgf.cm, 74 in.lbf) for ground cable x air pump
c. Install the ground cable with the bolt.
d. Connect the air hose No. 5.
e. Connect the air pump connector.
f.
Connect the air pump relay connector.
g. Install the front fender liner with the 2 screws and clip.