Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-643001.png)
Ignition Switch: Service and Repair
IGNITION OR STARTER SWITCH ASSEMBLY (1ZZ-FE/2ZZ-GE)
REPLACEMENT
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE STEERING COLUMN COVER LWR
a. Remove the 3 screws, then remove the steering column cover LWR.
3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY
a. Disconnect the ignition switch connector and unlock the warning switch connector.
b. Disconnect the unlock warning switch connector from the ignition switch assembly.
c. Disconnect the wire harness from the steering assembly.
