Corolla L4-18L (2ZZ-GE) (2005) - Fuel Pressure Specifications
h. Install SST and the fuel tube connector into the vehicle.
SST 09268 - 41047 (95336 - 08070), 09268 - 45014 (09268 - 41200, 09268 - 41220, 09268 - 41250)
i.
Wipe off any split gasoline.
j.
Connect the battery negative terminal.
Torque: 5.4 Nm (55 kgf.cm, 48 in.lbf)
k. Connect the hand-held tester to the DLC3.
l.
Turn the ignition switch to ON.
m. Turn the hand-held tester ON.
n. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / FUEL PUMP/SPD.
o. If you have no hand-held tester, connect the positive (+) lead from the battery to terminal 5 of the connector, and the negative (-) lead to
terminal 4.
p. Measure the fuel pressure.