Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-211001.png)
Wiper Switch: Service and Repair
WINDSHIELD WIPER SWITCH ASSEMBLY
REPLACEMENT
HINT: Installation is in the reverse order of removal.
1. REMOVE STEERING COLUMN COVER LWR
a. Remove the 3 screws and the steering column cover LWR.
2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Release the claw and pull out the windshield wiper switch assembly as shown in the illustration.
NOTE: Pressing the claw hard breaks the claw.
