Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-927014.png)
c. Coat a new power steering control valve lower bearing with molybdenum disulfide lithium base grease.
d. Using SST and a press, install the power steering control valve lower bearing.
SST 09950-60010(09951-00220,09950-70010 (09951-07100)
46. INSTALL POWER STEERING CYLINDER TUBE OIL SEAL
a. Coat a new power steering cylinder tube oil seal lip with power steering fluid.
b. Using SST and a press, install the power steering cylinder tube oil seal.
SST 09950-60010 (09951-00240, 09951-00400, 09952-06010), 09950-70010 (09951-07360)
NOTICE: Make sure that the power steering cylinder tube oil seal is installed in the correct direction as shown in the illustration.
47. INSTALL POWER STEERING RACK
a. Coat a new O-ring with power steering fluid and install it to the steering rack.
b. Coat a new power piston oil seal with power steering fluid.
c. Expand the power piston oil seal with your fingers.
NOTICE: Be careful not to overly expand the power piston oil seal.
d. Install the power piston oil seal to the steering rack, and adjust with your fingers.
