Corolla L4-1.8L (2ZZ-GE) (2005)
4. SEPARATE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Remove the bolt and 2 nuts, and separate the front suspension arm sub-assy lower No.1 LH from the lower ball joint assy front LH.
5. SEPARATE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 RH (LH (A/T) POSITION)
HINT: Remove the RH side by the same procedures as the LH side.
6. SEPARATE RACK & PINION POWER STEERING GEAR ASSY (LH (A/T) POSITION)
a. Remove the 4 bolts, separate the rack & pinion power steering gear assy.
NOTICE: Loosen the bolt since the nut cannot be rotated.
b. Suspend the rack & pinion power steering gear assy.
7. SUSPEND ENGINE ASSY (LH (A/T) POSITION)
8. SEPARATE FRONT SUSPENSION CROSSMEMBER SUB-ASSY (LH (A/T) POSITION)
a. Remove the 3 bolts and 3 nuts, disconnect the transverse engine mounting insulator and engine mounting member sub-assy center from the
front suspension crossmember sub-assy.
b. Remove the 4 bolts.
c. Lower the transmission jack; remove the front suspension crossmember sub-assy.
9. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH