Corolla L4-1.8L (2ZZ-GE) (2005)
5. TEMPORARILY TIGHTEN TOWER BAR BRACKET SUB-ASSEMBLY LH
a. Install the tower bar bracket sub-assembly LH to the front suspension bar assembly tower with the bolt.
6. INSTALL TOWER BAR BRACKET SUB-ASSEMBLY RH
a. Install the tower bar bracket sub-assembly RH to the front suspension bar assembly tower with the bolt.
Torque: 52 Nm (530 kgf-cm, 38 ft. lbs.)
7. INSTALL FRONT SUSPENSION BAR ASSEMBLY TOWER
a. Install the front suspension bar assembly tower with the 6 nuts.
Torque: 39 Nm (398 kgf-cm, 29 ft. lbs.)
8. FULLY TIGHTEN TOWER BAR BRACKET SUB-ASSEMBLY LH
a. Fully tighten the nut.
Torque: 52 Nm (530 kgf-cm, 38 ft. lbs.)